404 means the file is not found. If you have already uploaded the file then the name may be misspelled or it is in a different folder.
You may get a 404 error for images because you have Hot Link Protection turned on and the domain is not on the list of authorized domains.
If you go to your temporary url (ip/
username/) and get this error, there maybe a problem with the rule set stored in an .htaccess file. You can try renaming that file to .htaccess-backup and refreshing the site to see if that resolves the issue.
It is also possible that you have inadvertently deleted your document root or the your account may need to be recreated. Either way, please contact your web host immediately.
Are you using WordPress? See the Section on 404 errors after clicking a link in WordPress.
When you get a 404 error be sure to check the URL that you are attempting to use in your browser.This tells the server what resource it should attempt to request.
In this example the file must be in public_html/example/Example/
Notice that the CaSe is important in this example. On platforms that enforce case-sensitivity e xample and E xample are not the same locations.
For addon domains, the file must be in public_html/addondomain.com/example/Example/ and the names are case-sensitive.
When you have a missing image on your site you may see a box on your page with with a red X where the image is missing. Right click on the X and choose Properties. The properties will tell you the path and file name that cannot be found.
This varies by browser, if you do not see a box on your page with a red X try right clicking on the page, then select View Page Info, and goto the Media Tab.
In this example the image file must be in public_html/cgi-sys/images/
Notice that the CaSe is important in this example. On platforms that enforce case-sensitivity PNG and png are not the same locations.
When working with WordPress, 404 Page Not Found errors can often occur when a new theme has been activated or when the rewrite rules in the .htaccess file have been altered.
When you encounter a 404 error in WordPress, you have two options for correcting it.
- Log in to WordPress.
- From the left-hand navigation menu in WordPress, click Settings Permalinks (Note the current setting. If you are using a custom structure, copy or save the custom structure somewhere.)
- Select Default .
- Click Save Settings .
- Change the settings back to the previous configuration (before you selected Default). Put the custom structure back if you had one.
- Click Save Settings .
This will reset the permalinks and fix the issue in many cases. If this doesn’t work, you may need to edit your .htaccess file directly.
Add the following snippet of code to the top of your .htaccess file:
# BEGIN WordPress
RewriteRule ^index.php$ – [L]
RewriteCond % !-f
RewriteCond % !-d
RewriteRule. /index.php [L]
# End WordPress
If your blog is showing the wrong domain name in links, redirecting to another site, or is missing images and style, these are all usually related to the same problem: you have the wrong domain name configured in your WordPress blog.
The .htaccess file contains directives (instructions) that tell the server how to behave in certain scenarios and directly affect how your website functions.
Redirects and rewriting URLs are two very common directives found in a .htaccess file, and many scripts such as WordPress, Drupal, Joomla and Magento add directives to the .htaccess so those scripts can function.
It is possible that you may need to edit the .htaccess file at some point, for various reasons.This section covers how to edit the file in cPanel, but not what may need to be changed.(You may need to consult other articles and resources for that information.)
- Edit the file on your computer and upload it to the server via FTP
- Use an FTP program’s Edit Mode
- Use SSH and a text editor
- Use the File Manager in cPanel
The easiest way to edit a .htaccess file for most people is through the File Manager in cPanel.
Before you do anything, it is suggested that you backup your website so that you can revert back to a previous version if something goes wrong.
- Log into cPanel.
- In the Files section, click on the File Manager icon.
- Check the box for Document Root for and select the domain name you wish to access from the drop-down menu.
- Make sure Show Hidden Files (dotfiles) ” is checked.
- Click Go. The File Manager will open in a new tab or window.
- Look for the .htaccess file in the list of files. You may need to scroll to find it.
- Right click on the .htaccess file and click Code Edit from the menu. Alternatively, you can click on the icon for the .htaccess file and then click on the Code Editor icon at the top of the page.
- A dialogue box may appear asking you about encoding. Just click Edit to continue. The editor will open in a new window.
- Edit the file as needed.
- Click Save Changes in the upper right hand corner when done. The changes will be saved.
- Test your website to make sure your changes were successfully saved. If not, correct the error or revert back to the previous version until your site works again.
- Once complete, you can click Close to close the File Manager window.
INFONA – science communication portal
A novel structure is proposed for Interline Power Flow Controller based on Multi Output Sparse Matrix Converter. The Multi Output Sparse Matrix Converter is first considered in this paper and has been used as IPFC instead of multiple inverters. The conventional IPFC contains a bulky capacitor in its structure that increases volume and cost of the system and since it has limited lifetime consequently it reduces reliability and life time of IPFC, but the new IPFC does not have those problems. Necessary information needed to simulate Multi Output Sparse Matrix Converter is presented. The new IPFC system is modeled and sliding mode controller is used to control line current in order to control line power. Sliding mode control is selected because of its robustness and fast response time. Sliding mode control is implemented in an improved manner. Finally, proposed IPFC is simulated in PSCAD/EMTDC.
A novel structure is proposed for Interline Power Flow Controller based on Multi Output Sparse Matrix Converter. The Multi Output Sparse Matrix Converter is first considered in this paper and has been used as IPFC instead of multiple inverters. The conventional IPFC contains a bulky capacitor in its structure that increases volume and cost of the system and since it has limited lifetime consequently it reduces reliability and life time of IPFC, but the new IPFC does not have those problems. Necessary information needed to simulate Multi Output Sparse Matrix Converter is presented. The new IPFC system is modeled and sliding mode controller is used to control line current in order to control line power. Sliding mode control is selected because of its robustness and fast response time. Sliding mode control is implemented in an improved manner. Finally, proposed IPFC is simulated in PSCAD/EMTDC software and output waveforms are compared with reference values.
Change font size
You can adjust the font size by pressing a combination of keys:
- CONTROL + + increase font size
- CONTROL + decrease font
Navigate the page without a mouse
You can change the active elements on the page (buttons and links) by pressing a combination of keys:
- TAB go to the next element
- SHIFT + TAB go to the previous element
Financed by the National Centre for Research and Development under grant No. SP/I/1/77065/10 by the strategic scientific research and experimental development program: SYNAT – “Interdisciplinary System for Interactive Scientific and Scientific-Technical Information”.